Maintenance method of conveyor belt

If the rubber conveyor belt is maintained and maintained, the service life of the conveyor belt can be extended, thereby effectively reducing the production cost. factors that affect its service life. For modern engines, compact engine compartments, high compression ratios, and turbocharging in some models will increase the temperature in the engine compartment and make the drive belt work in a rather harsh environment. Experiments show that the service life of the drive belt decreases sharply with the increase of the ambient temperature. So what is the maintenance method of the conveyor belt? Let me introduce it to you, I hope it can be helpful to you.

1. During storage, the temperature in the warehouse should be kept between -15-+40, and the relative humidity should be kept between 50-80%.

2. During transportation and storage, the rubber conveyor belt should be kept clean, prevent direct sunlight, rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances that affect the quality of rubber, and be 1 meter away from heating equipment .


3. The working speed of the rubber conveyor belt should not be greater than 5.0 m/s, and the low speed should be used as far as possible when transporting materials with large lumps and high wear and using fixed plow-type unloading equipment. When the speed exceeds the specified speed, the service life of the tape will be affected.

4. The rubber conveyor belt must be placed in rolls during storage, and must not be folded. During the storage period, it should be turned over once a quarter.

5. In order to reduce the impact and wear of the material on the tape, the feeding direction should follow the working direction of the tape; the drop of the material falling on the tape should be minimized; the feeding port should avoid the top of the roller or idler; In the material section, the distance between the idlers and the buffering method should be shortened. In order to prevent the tape from being scratched, the contact part of the scraper cleaning device and the unloading device with the tape should be a rubber plate with suitable hardness, and a tape head with a cloth layer should not be used.

6. The connection between the diameter of the drive roller of the conveyor and the cloth layer of the conveyor belt, the matching of the drive roller to the reversing roller and the request for the groove angle of the idler should be reasonably selected according to the design rules of the conveyor.

7. Prevent the tape from being blocked by racks, pillars or block materials, and prevent it from being broken and torn.

8. In the process of use, prevent the idler from being covered by the material, resulting in ineffective rotation, to prevent the leakage of the material from being stuck between the roller and the tape, and pay attention to some lubrication, but do not contaminate the conveyor belt.

Category:
News