Structural characteristics of rubber-lined slurry pump

Lining pump, AHR slurry pump, corrosion-resistant slurry pump, generally means that the lining of the slurry pump is made of rubber. From the lining material of the slurry pump, it can be divided into rubber lining and metal lining (high chromium). The lining of the glue pump is that the slurry pump is made of natural rubber.

The inner lining of the slurry pump is generally divided into two types, wear-resistant metal and wear-resistant rubber. Rubber linings and metal linings have very different characteristics. The rubber lining is generally better than the metal lining (high chromium) in corrosion resistance, but the corrosion resistance is not very good. The lining of metal high-chromium alloys generally has good wear resistance. Therefore, when choosing a slurry pump, the material of the lining must be selected according to the customer's industrial and mining conditions and the composition of the slurry to be transported.

Generally, for the alloys of nickel, molybdenum and other minerals that are not very abrasive, a rubber-lined slurry pump can be selected; for iron ore, gold ore and other abrasive slurries, a metal-lined slurry pump is selected.


Rubber-lined slurry pump, rubber-lined slurry pump price, rubber pump parameter description:

Rubber-lined slurry pump structure: AHR type rubber-lined slurry pump is a cantilever, horizontal double-shell axial suction centrifugal slurry pump. The outlet position of the pump can be installed and used by rotating at eight different angles at intervals of 45°C as required.

Rubber slurry pump material: The pump body of the AHR type rubber-lined slurry pump has a replaceable rubber lining, and the impeller, guard plate, and front and rear sheaths are all made of wear-resistant and corrosion-resistant rubber.

Use of glue pump: AHR glue pump is suitable for conveying small particle size, no sharp corner particles and high concentration slurry, and can also convey corrosive slurry.

Rubber-lined slurry pump sealing form: packing seal, auxiliary impeller seal, packing plus auxiliary impeller seal, mechanical seal and other types.

Transmission type of rubber-lined slurry pump: DC direct drive, CR parallel belt drive, ZVZ upper and lower belt drive, CV vertical belt drive, etc.

Model meaning of rubber-lined slurry pump: For example: 6/4D-AHR

6: Suction diameter; 4: Discharge diameter; D: Bracket type; AH: Product series; R: Rubber lining

Rubber-lined slurry pump accessories include: rubber slurry pump impeller, rubber slurry pump sheath, rubber slurry pump guard plate, rubber slurry pump shaft sleeve, rubber slurry pump has good anti-corrosion performance and long service life, welcome to get quotation

Category:
News